Capabilities

Every spec we build to, in one place. Trace and space, clearances, drill, finishes, and materials are listed by service tier, from Limited Review orders to fully custom builds, all produced under AS9100D, ISO 9001, and ITAR registration. Use it to design within our limits from the start, or to see where a custom build opens up tighter numbers.

Material Type, Copper weight and PCB design may limit trace and space capabilities.

LAYERSCopper Weight (oz/sq ft) pre-plate	Limited Review	Online NRE	Custom
< 0.5 oz Cu	NO	YES	YES*
< 0.5 oz Cu	NO	YES	YES*
1 oz Cu	YES	YES	NO
2 oz Cu	YES	NO	YES*
3 oz Cu	NO	NO	YES*
>3 oz Cu	NO	NO	YES*

Note: *Material availability may impact lead timeMinimum trace/space INNER.

	Limited Review	Online NRE	Custom
< 0.5 oz Cu	N/A	YES	YES*
0.5 oz Cu	N/A		RFQ
1 oz Cu	0.005"	0.004/0.004"	0.003" / 0.003"
2 oz Cu	0.005"	0.005"/0.005"	0.004" / 0.004"
>3.0 oz Cu	N/A	N/A	0.007"/0.007"

Note: *Material availability may impact lead timeMinimum clearance and pads INNER

	Limited Review	Online NRE	Custom
Clearances - Through Hole Drill	0.020" larger than finished hole size	0.020" larger than finished hole size	0.020" larger than finished hole size
Clearances - Plated Slots	0.020" larger than finished hole size	0.020" larger than finished hole size	0.020" larger than finished hole size
Pads - Through Hole Drill	0.016" larger than finished slot dimension	0.016" larger than finished slot dimension	0.016" larger than finished slot dimension
Pads for Vias	0.016" larger than finished hole size	0.016" larger than finished hole size	0.016" larger than finished hole size
Pads Plated Slots	0.016" larger than finished slot dimension	0.016" larger than finished slot dimension	0.016" larger than finished slot dimension
Minimum backset distance from copper feature to route/cut-line)	+/- .020"	+/- .020"	+/- .010"
Trace width variation (Non Impedance)

Capabilities

Get Instant Quote

Certifications & Conformance

Subscribe to Our Newsletter